基于改进奇异值分解滤波和谱峭度的滚动轴承故障诊断

针对含噪信号的有效奇异值个数难以确定的问题，提出了一种改进的奇异值分解降噪方法--奇异值累积法。该方法通过计算奇异值的实际下降值与奇异值平均下降速度累积量的差值，并取该差值最大值点的位置作为有效奇异值的分界点来确定有效奇异值的个数。在此基础上，提出了一种基于奇异值累积法与快速谱峭度的滚动轴承故障诊断方法。采用奇异值累积法对原信号进行降噪处理，然后利用快速谱峭度确定滤波器中心频率及带宽，通过分析频段包络谱中明显的频率成分来诊断故障。该方法可以有效去除信号中的噪声，使得到的峭度值所反映的故障冲击更接近实际情况。对含内圈、外圈故障的滚动轴承实验数据进行分析，实验结果表明，相比快速谱峭度的故障诊断方法，该方法具有更好的故障识别效果。     

Delay Constrained Relay Node Placement in Wireless Sensor Networks: A Subtree-and-Mergence-based Approach

Wireless Sensor Networks (WSNs) are applied in many time-critical applications, e.g., industrial automation and smart grid. This highlights the importance of Delay Constrained Relay Node Placement (DCRNP) problem that builds a path fulfilling a specified delay constraint between each sensor and the sink by using a minimum number of relays. Due to the NP-hardness of the DCRNP problem, in this paper, a polynomial time Subtree-and-Mergence-based Algorithm (SMA) is proposed to approximately solve the DCRNP problem. First, a shortest path tree rooted at the sink and connecting all sensors is built to check the feasibility of the DCRNP problem. If the DCRNP problem is feasible, then the paths of this tree are progressively merged at some relays, which are not limited to those relays lying in the originally the originally built shortest path tree, to save deployed relays while maintaining the obedience of delay constraints. With the repetition of this mergence, the number of deployed relays is gradually reduced. Furthermore, the approximation ratio and the time complexity of the proposed SMA are elaborately analyzed. Finally, extensive simulations are conducted to demonstrate the effectiveness of this work. Simulation results show that SMA can significantly save deployed relays comparing with existing algorithms.     

Data quality and uncertainty assessment methodology for pavement LCA

In performing pavement life cycle assessment (LCA), users are facing various reports of energy intensity coefficient (EIC) of pavement materials which differ considerably among data sources and therefore alter the LCA results significantly. Instead of selecting a certain EIC without or of little explanation for the current pavement LCA practices, this study proposed a methodology to build probability density function (PDF) for EIC based on available data-set and their qualities. Each data was first evaluated about the data quality indicator (DQI) through data quality pedigree matrix and converted to PDF in modified Beta distribution form. Three weighting methods, the DQI one, coefficient of variation (COV) one and analytical hierarchy process (AHP) one, were developed to assign weightings for different data. Monte Carlo simulation was run with the weighted PDF of each data as input to obtain the ultimate PDF for EIC. A case study to estimate the bitumen’s EIC with eight data samples were performed using the proposed methodology. It is found (1): the estimates by the proposed methodology is of higher reliability (lower COV) compared to any single data due to utilisation of information of the overall data samples; (2) the AHP weighting method is most favoured despite the results of the three weighting methods are close; (3) the central estimates of bitumen’s EIC are between5.4~5.8 MJ/kg. The proposed methodology is helpful in aiding calculating EICs for pavement materials and capturing uncertainties in LCA results in a statistical sense.     

The Modification of Chrome Tanned Leather by Polyethylene Glycol-Linked Gemini Fatty Alcohol Phosphate

A series of polyethylene glycol-linked Gemini fatty alcohol phosphate surfactants (GFAP) were prepared with long chain n-alkanol (C = 8, 12, 16, 18), polyethylene glycol (PEG-200, PEG-400, PEG-600, PEG-800, PEG-1000) and phosphorus oxychloride (POCl₃). The structure of the prepared surfactants was characterized by Fourier transform infrared spectrometer (FT-IR). The surfactants were employed for the modification of chrome-tanned leather. The morphological changes of chrome-tanned leather and modified chrome-tanned leather were observed by scanning electron microscopy (SEM). The relationship between the alkyl chain length and molecular weight of the PEG and the hydrophobicity, softness, mechanical strength of modified chrome-tanned leather was also discussed. The experimental results showed that the mechanical strength and softness of modified chrome-tanned leather were enhanced with an increase of alkyl chain length, while the hydrophobicity, mechanical strength and softness were decreased with an increase of molecular weight of the PEG. The hydrophobicity, mechanical strength and softness of modified chrome-tanned leather were optimized for an alkyl chain length of 16. Therefore, 16–200 Gemini phosphate surfactants with an alkyl chain length of 16 and a PEG molecular weight of 200 have a good comprehensive modification effect on Chrome-tanned leather, the tensile strength, tear strength and softness of modified chrome-tanned leather are 57.07 N mm⁻², 79.49 N mm⁻¹, 9.73 mm, respectively.     

小型特种精细化工过程自动化和信息化研究发展趋势探讨

针对采取小批量间歇性批次生产方式、工艺介质腐蚀性强、危险性大的小型特种精细化工生产工艺研究试验过程自动化、信息化程度不高，导致工艺研究试验中获取数据较少、过程机理研究不够透彻、人工操作多、安全风险高、研究试验消耗大及效率不高等问题，综述了期待通过智能控制、在线分析、模拟仿真和虚拟制造、工况监测及预测性维护以及信息管理和生产调度等关键技术的研究和应用，提高小型特种精细化工生产工艺过程的自动化和信息化程度，实现小型特种精细化工生产工艺过程的数字化、虚拟化和智能化，降低生产安全风险和试验消耗，提高小型特种精细化工生产工艺研究试验的成功率和效率，达到小型特种精细化工生产工艺过程的数字化设计和精准生产的目标。     

生产工艺多方案并行与快速转换方法研究

生产系统复杂多变,在生产管理过程中存在多变性和不均衡性。对此,实际生产中需要实现生产工艺多方案并行与快速转换。分析了生产过程变化因素,介绍了主工艺+子工艺这一生产工艺多方案并行与快速转换方法,并通过实例验证了这一方法的有效性。     

济阳坳陷下古生界潜山油气藏特征及成藏模式

济阳坳陷下古生界潜山具有多样性、复杂性的特点，潜山差异性的形成演化、油气成藏主控因素和控藏模式不明确，严重制约了该区潜山油气勘探。在潜山分类的基础上，综合利用系统恢复、分类对比和典型解剖等方法，揭示了济阳坳陷下古生界不同类型潜山的形成演化过程和油气成藏主控因素差异性，分类建立了油气成藏模式。研究表明，济阳坳陷下古生界主要发育高位新盖侵蚀残丘潜山、中位古盖拉张断块潜山、中位新古盖拉张剪切断块潜山、中位中古盖挤压拉张断块潜山和低位古盖拉张滑脱断块潜山5种潜山类型。不同类型潜山的形成演化和油气成藏各具特色，其中，高位新盖侵蚀残丘潜山的发育受隆升、侵蚀作用控制，油气成藏主要受控于油源和盖层条件，表现为"单向供烃、砂体-不整合岩溶体联合输导、残丘控藏"的成藏模式；中位古盖拉张断块潜山的发育受掀斜、断裂作用控制，油气成藏主要受控于储集条件，表现为"单向供烃、顺向断层输导、反向断层控藏"的成藏模式；中位新古盖拉张剪切断块潜山的发育受反转、翘倾和走滑切割作用控制，油气成藏主要受控于输导条件，表现为"多源供烃、断溶体立体输导、断裂控藏"的成藏模式；中位中古盖挤压拉张断块潜山的形成受强烈挤压、拉张滑脱作用控制，油气成藏主要受控于储集条件，表现为"多源供烃、断缝体输导、断褶控藏"的成藏模式；低位古盖拉张滑脱断块潜山的形成受强烈拉张滑脱作用控制，油气成藏主要受控于输导条件，表现为"顶部供烃、断缝体输导、断裂控藏"的成藏模式。     

大口径光学元件装夹转运结构设计及分析

为了实现大口径光学元件的安全装夹、转运,通过光学元件开槽与不开槽两种装夹方式的分析,得出开槽夹紧转运方式将带来微裂纹、应力集中、成本高等缺陷,提出了利用摩擦力克服光学零件的重力和惯性力的低应力装夹转运方案。通过对光学元件低应力夹紧结构设计,并利用有限元分析方法,得到不开槽装夹方式下,光学元件的最大主应力为1.11 MPa,最大切应力为0.73 MPa,远低于光学元件破坏的强度极限,且受力均匀,无应力集中现象。     

再加工工艺对N18锆合金板残余应力的影响

采用“热轧+冷轧+退火”工艺对N18锆合金板进行再加工,通过X射线法分析板的表面残余应力,采用EBSD技术分析晶界取向差角分布和大小角度晶界。结果表明,热轧后N18锆合金板的表面残余应力呈现无规律分布状态;冷轧后板的表面残余应力均为压应力,其大小随着冷轧变形量的增加而增加;退火后板的表面残余应力值处于较低水平,当退火制度为500 ℃×2 h时,残余应力处于最低水平;退火后,板的微观结构以小角度晶界为主,且随着退火温度的升高,小角度晶界的密度先增加后趋于稳定。